HEISHA D135 Drone Charging Dock
The D135 docking station achieves an IP55 protection rating, establishing it as an industrial-grade autonomous drone charging platform with extensive compatibility, accommodating customizable voltages from 2s to 14s, and featuring open connectors to facilitate a variety of expansions.
Key to its robust industrial design are the integrated T3-rated weather station and an internal compressor-based air conditioning system, which collectively ensure optimal performance and reliability in demanding environments.
Highlights of D135 drone charging dock
1 hour
Fast charge
2s-14s
Compatibility
-20~50℃
Any weather
IP55
Protection rating
VTOL drone
available
HS Pilot
A FREE autonomous flight software
HS Pilot is an autonomously operated flight software created by HEISHA, offered at no cost, which enables users to remotely command the D135 drone docking station for flight, maneuvering, and landing using a smartphone, laptop, or even a television screen.
This comprehensive drone flight software facilitates both routine waypoint flights essential for daily inspections and patrols, as well as immediate point-to-point flights in emergencies. It also caters to users wishing to conduct detailed examinations of specific areas through its provision for manual flight control.
Upon conclusion of each flight mission, recorded videos and images are compiled within the system, readily available for subsequent data analysis and review.
Works with hybrid VTOL Fixed-wing drone
HEISHA D135 drone charging dock works with the HEQ Swan Voyager and offers an automated drone solution, the drone can automatically take off by remote controlling software. It takes about 50 minutes to charge this hybrid drone from zero to full.
5G support online operation
By connecting with 5G, the hybrid VTOL drone can be remotely controlled online via HEISHA’s BMOS (Robot Mansion Operating system).
Remotely controlled autonomous flight
Collect aerial videos for evidence capturing, daily patrolling, emergency response, or site mapping in front of a laptop.
HEISHA drone charger kit for DJI M350
This HEISHA M350 drone charging kit includes landing gear and a charger.
The landing gear can realize the electric control of switching the DJI M350, and obtain the actual state of the switch machine, as well as the real-time current and voltage values. The charging contact pins on the charging stand have been specially treated for water, dust, and oxidation. The whole module is die sinking for structural stability and a lower cost.
The charger part is smaller in size, and lower in cost and failure rate because it does not need an external communication module, and can charge two batteries simultaneously. In addition, the charger’s intelligent and safe charging control can prevent overheating of charging.
The most important thing is that it is highly compatible and can be widely compatible with 6s-12s drone batteries.
Applications
Packing list
Specifications
| Size | Close: 1730*1520*1710 mm Open: 1730*1520*1220 mm |
| Weight | 330 kg |
| IP rating | IP55 |
| Material | Full sheet metal processing |
| Voltage | 3000W |
| Working power | AC 100~240 V |
| Working temperature | -20℃~ 50℃ |
| Contained drone | 1 |
| Installation site | Ground or roof |
| Operation mode | Fully automated |
| Charging time | 60 mins |
| Recycling method | Autonomous and precise landing (visible) |
| Drone power supply method | Charging via wire |
| Protection | Overvoltage, overload, power-off protection |
| Sensors | Windspeed, rain gauge, temperature, humidity |
| Monitoring camera | Resolution: 1080p FOV: 105 |
| Air conditioner | Voltage: AC100~240 Type: Compressor, PTC |
| Internet | Ethernet, support 4G |
| Support software | FreeSky、FlytNow、DNEST4 |
| Expansion | Protocol: MQTT/MODBUS RTU Compatible drones: DJI Mavic2\ Mavic3\Mini\Autel(standard); customizable for other models |
| Lifespan | ≥5000hours |